We fix what's broken, fast, and we don't disappear after the invoice. Same-day appointments available across Washington and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
You'll get a flat-rate quote before any repair work begins — no guessing what the final bill will look like.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC grew one honest service call at a time in communities like Washington. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
We're not interested in being the cheapest quote on the page — we're the company that tells you what actually needs fixing instead of what pads the ticket. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, big or small.
Being local matters more than most companies let on. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Ask around Washington and you'll hear the same complaint about a lot of HVAC companies. That's the gap we built Leonard HVAC to close. We'd rather lose a job to a lower bid than win one by cutting corners on the diagnosis, because a customer who trusts us once tends to call us again — and Washington is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Washington rooftop unit. We keep parts inventory stocked based on what actually fails most often on Washington's housing stock.
We cover the full range of heating, cooling, and air quality work Washington properties actually need.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Washington dispatch team prioritizes no-heat and no-cooling calls so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
Not every repair call ends in a repair — sometimes the honest recommendation is a properly sized replacement. We walk Washington homeowners through financing and rebate options where available before a single piece of equipment gets ordered.
We protect floors and entryways during the install and haul away the old equipment so you're not left dealing with disposal.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services light industrial and warehouse ventilation across Washington, with service agreements built around your operating hours.
Property managers working with multiple Washington locations can set up a standing account so every site gets consistent service history and pricing.
Preventive maintenance is the cheapest repair you'll ever pay for, because it's the one that prevents the bigger bill. Beyond standard tune-ups, we also handle duct cleaning and sealing to stop conditioned air from leaking into attics and crawlspaces for Washington households that want more than just temperature control.
A tune-up typically takes under an hour and covers the checkpoints most likely to catch a problem before it becomes a breakdown.
We'd rather set clear expectations upfront than make vague promises we can't back up.
If the same issue returns within the warranty period, we come back and fix it at no additional labor cost.
Emergency dispatch never comes with a hidden surcharge sprung on you after the fact.
A technician doesn't consider the job done until the system is tested and performing correctly.
Most breakdowns don't happen without warning — they announce themselves for weeks before the system actually quits.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
This is one of the most common complaints we hear on service calls across Washington.
Gradual efficiency loss is easy to miss month to month, but it adds up fast over a season.
Short cycling puts extra wear on the compressor and shortens the system's overall lifespan.
A burning smell should never be ignored — it can indicate an electrical issue that needs immediate attention.
If you're calling about the same problem every few months, the underlying cause likely hasn't been fully addressed.
We explain diagnostic fees and repair estimates before authorizing work.
Emergency calls get moved to the front of the line automatically.
Parts and labor are backed by warranty terms explained in plain language.
Our techs recognize brand-specific quirks instead of learning your system on the job.
You make the final call — we just make sure you have the full picture.
Maintenance plan members get priority scheduling and discounted rates.
We don't write these — our customers do.
"I called three other companies first and this was the only one that actually picked up. No pressure to buy a whole new system when a repair was all we needed."
"Signed up for the annual plan after our first repair and it's paid for itself already. Never once felt like I was being upsold on something I didn't need."
"Had a full system replacement done and it was the smoothest home project I've had in years. New system is noticeably quieter and our energy bill actually dropped."
"Our restaurant's rooftop unit went down on a Friday night and they had someone out fast. Now our go-to for every property in the portfolio."
"I appreciated that they didn't try to sell me a bigger unit than I needed. My energy bill dropped noticeably the first month with the new system."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
After thousands of service calls across Washington, a handful of causes show up again and again.
The shift between peak heating and peak cooling demand is exactly when older or neglected equipment tends to fail. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Keeping vents unblocked by furniture and rugs helps maintain even airflow throughout the home. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
We also service package units common on manufactured and modular homes throughout the Washington area. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Handles the majority of Washington installs and specializes in properly sizing equipment for older housing stock.
Known for fast, accurate diagnostics on no-heat and no-cool breakdowns.
Works directly with Washington property managers to schedule around business hours.
For emergency no-heat or no-cool calls, we prioritize dispatch and aim to have a technician on-site the same day, often within a couple of hours.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
We staff after-hours dispatch specifically because HVAC failures rarely happen on a convenient schedule.
Yes — licensing and insurance documentation is available on request for any job, residential or commercial.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Plan members typically see fewer surprise breakdowns because small issues get caught during routine visits.
We cover Washington and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
If parts require special ordering for a less common brand, we'll communicate that timeline upfront.
Financing options are available for qualifying replacement installations, and our team can walk you through what's currently offered.
Systems that run harder due to heavy year-round use may benefit from more frequent check-ins.
Check that the thermostat has power and the batteries aren't dead, and check your breaker panel for a tripped switch before calling.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
Most standard repairs are completed in under two hours once the technician has diagnosed the issue and you've approved the quote.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
Housing stock varies a lot across Washington — older homes often still run original ductwork that needs different care than the sealed, high-efficiency systems going into newer builds.
We also work regularly with homeowners associations, property management companies, and multi-unit buildings throughout Washington.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Washington installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
Coverage extends across Washington proper and into the nearby zip codes listed below.
If you're on the edge of our listed zip codes, it's still worth a call, since routes and coverage get adjusted as demand shifts.
